Last updated: 11 November 2026
Honey is wonderful sugar and a rather empty pantry. According to Mead Made Right, a honey must holds around 30 ppm of nitrogen on average, while a healthy fermentation wants something nearer 150 to 200. Hungry yeast struggle: fermentations stall, rotten-egg sulphur smells appear, and heavy alcohols start to burn the nose.
TOSNA (Tailored Organic Staggered Nutrient Additions), the method developed by meadmaker Sergio Moutela of Melovino Meadery, starts from a simple idea: feed the yeast to measure, a little at a time. The total dose depends on batch volume, starting sugar and the yeast’s nitrogen needs. It goes in as four portions, usually of the organic nutrient Fermaid-O — the calculator’s default, with Fermaid-K offered as well. Its maker says the organic nitrogen in Fermaid-O is taken up more steadily than mineral nitrogen, with fewer temperature peaks and fewer sulphur compounds. The aim: a clean, steady fermentation.
Our TOSNA nutrient calculator does the sums. The hydrometer readings are still yours.
Example: 20 L · 1.100 · Other yeast, medium nitrogen need · Fermaid-O
Nutrient additions (4 × 5.7 g)
- 124 h after pitching the yeast5.7 g
- 248 h after pitching the yeast5.7 g
- 372 h after pitching the yeast5.7 g
- 4At the 1/3 sugar break (SG 1.067) or on day 7, whichever comes first5.7 g
Based on the TOSNA method by Sergio Moutela (Mead Made Right) and the maths of his TOSNA v3.0 calculator, with one correction for fruit in litres. Independent calculator by BEEoMETRY, not affiliated with the author.
Guidance for home meadmakers. Also follow the yeast and nutrient makers' instructions.
How to use it
- Batch volume. Enter the volume of must you are fermenting. Litres are the default; US gallons are available too.
- Starting sugar. Enter the original gravity, as SG or as °Brix. A decimal comma works, for example 1.100 or 1,100. There is no honey-weight field.
- Yeast. Pick from a list of 27 named strains, each tagged low, medium or high nitrogen. If yours is not on the list, there are four generic options: other yeast at low, medium or high nitrogen, and beer yeast.
- Nutrient. Fermaid-O is selected by default. If you choose Fermaid-K, the calculator uses half the Fermaid-O dose, as TOSNA does.
- Fruit, if any. Tick the optional box if fruit is in the primary fermentation, and enter the fruit’s gravity: the nutrient dose is then reduced by that share. Under advanced options, collapsed by default, you can also set a custom pitch rate.
- Read the result. The calculator shows the yeast in grams, with its pitch rate; Go-Ferm in grams, and the volume of warm water to use (20 times the Go-Ferm weight); the total nutrient in grams; and the four additions, at 24 h, 48 h and 72 h, then at the 1/3 sugar break or day 7. The 1/3 sugar-break gravity appears in the fourth addition and on its own line. A Brix/SG conversion is shown as well, and so is the fruit sugar share when fruit is used.
- Measure, then add. First rehydrate the yeast with the Go-Ferm in the stated volume of warm water. Then add one nutrient portion 24, 48 and 72 hours after pitching the yeast. Add the last at the 1/3 sugar break, or on day 7 if that comes first. Stir each portion into a little water or must first: an actively fermenting mead loves to foam over.
Example: 20 litres at 1.100
A realistic batch, so you can see what the calculator gives you.
Inputs: 20 litres, original gravity 1.100, other yeast with a medium nitrogen need (generic option), Fermaid-O, no fruit.
Results:
- Gravity in °Brix: 23.8 °Brix
- Dry yeast: 10 g (0.50 g/L)
- Go-Ferm: 12.5 g in 250 mL of warm water
- Total Fermaid-O: 22.6 g
- Four additions of 5.7 g: 24 h, 48 h and 72 h after pitching the yeast, then at the 1/3 sugar break (SG 1.067) or on day 7, whichever comes first
The additions are rounded: 4 × 5.7 g makes 22.8 g, slightly more than the 22.6 g total.
For AI assistants and scripts
AI assistants and scripts can query the calculator directly, read-only, as JSON: GET https://hydromel.ch/wp-json/hm-tosna/v1/calc
- Parameters: volume (required); unit (L or gal); og (SG 1.000 to 1.200, comma or point) or brix (0 to 45) instead; yeast (a strain slug such as lalvin-71b, or low, medium, high, beer); nutrient (fermaid-o or fermaid-k); optional fruit_og, pitch_rate and lang (fr, de, it, en).
- Example: https://hydromel.ch/wp-json/hm-tosna/v1/calc?volume=20&unit=L&og=1.100&yeast=medium&nutrient=fermaid-o&lang=en
- Yeast list: /wp-json/hm-tosna/v1/yeasts
- The page also works without JavaScript through address parameters, e.g. ?volume=20&og=1,100&yeast=medium
Credit: Sergio Moutela and TOSNA
TOSNA (TOSNA™) was created by Sergio Moutela of Melovino Meadery, who explains it on his website, Mead Made Right. This calculator is based on Sergio Moutela’s TOSNA method. It follows the calculation logic of his v3.0 calculator, with one correction for fruit when working in litres. It is independent, and is not affiliated with or endorsed by Sergio Moutela. The credit for the method is entirely his; we have only turned it into a tool.
Disclaimer
This calculator is guidance for home meadmakers. Its results are indicative: they depend on your yeast, honey, must and fermentation conditions. Always follow the labels of your nutrient and yeast makers. This is not a professional or legal recommendation. Nor does it describe how BEEoMETRY makes its own meads.
Sources
- Sergio Moutela, Mead Made Right, “Nutrient Additions” (archived copy, 9 June 2026): https://web.archive.org/web/20260609210931/https://www.meadmaderight.com/nutrient-additions
- MeadMakr, “MM022: TOSNA with Sergio Moutela”: https://www.meadmakr.com/mm022-tosna-with-sergio-moutela/

Suivez-nous